Topic: The use of anatomically realistic throats and realistic inspiratory flow profiles in NGI

Sources:-(To be decided by writer. It is a must to cite all sources you use unless otherwise specified in the instructions)
Subject: Medicine
Topic: The use of anatomically realistic throats and realistic inspiratory flow profiles in NGI analytics of the dry powder inhalers
Paper details:Please could you write first about 15 pages of introduction part of thesis . If this is great the. I would maybe like to make another order for the discussion part of thesis.
The Master?s Thesis Research Report should be written in the form of a research publication. It is highly recommended to start writing parts of the report some time before finishing the experiments/data collection. A well written Project Plan ( I have project plan ) gives a good starting point for the final report. A stringent format of the written report is necessary for fair grading.
The current instructions for the Research Report are modified from the technical guidelines for manuscripts intended for submission into the Journal of Cell Biology http://jcb.rupress.org/ifora.
The length of the Research Report should be approximately 15 000 words, excluding the title page, abstract, references, and figure and table legends as well as possible Appendices/Supplementary Material. If the student wants to significantly exceed, or alternatively lower, the amount of words, s/he should consider very carefully if it is necessary.
The Research Report is written with Times or Arial font size 12 for all text, line spacing 1.5, except for figure and table legends which may be 1.0. If the Student is going to publish printed versions, the left margin should be 4 cm for easier binding, all other margins and for electronic publishing only minimum margin is 2 cm.Please Here Guidelines for Thesis :IntroductionIntroduction gives the reader background about the research topic to a non-expert reader. It should only contain themes that are related to the Thesis, but it gives the Student a possibility to concentrate on certain topics in a more detailed manner than what is usually done in research articles. Therefore, an introduction of the Thesis should be longer than in normal research publication.
Introduction starts with the general introduction and ends with the summary and conclusions about the current knowledge on the research topic. This part reveals how well the student masters his/her research area. The literature review is usually written in the present tense.
In the introduction the student should also present the motivation why the research project was done. Based on the problems raised in the current literature, the introduction presents the research questions which the thesis aims to solve, and also the hypothesis to be tested. This section includes the general introduction to the research problematics, background theories and detailed presentation of the aims in the performed work. This part does not need to be exhaustive, but rather a clear presentation of the major aims and their explanations if required.
Abbreviations List
According to JBC, a term that does not appear on the JCB standard abbreviations list must be used at least three times in a report to qualify as an abbreviation. Supply a list of nonstandard abbreviations used in the report, in alphabetical order, giving each abbreviation followed by its spelled-out version. The nonstandard abbreviations should also be spelled out on first mention in the text, and follow it with the abbreviated form in parentheses. Thereafter, the abbreviated form shall be used, but if the term is used less than three times, no abbreviation shall be used.References
The list of the references has to contain all the cited publications in the Thesis. It should not contain references which are not used in the text and vice versa, the text should not contain
citations which are not listed in the list of references. The citations to scientific articles, book chapters and text books are done according to the style of Journal of Cell Biology.
It is good to keep in mind that in all the scientific writing (thesis, articles etc.) it is very important to follow the instructions given about the references. Unfinished list of references can create and an impression that the whole work is done in a sloppy manner.Evaluation for the grading according the evaluation matrix. General criteria are:
1. Quality and meticulousness of the work. How the topic is presented? Is the central literature included and properly cited? Are the hypotheses clear and scientifically valid?
2. How suitable were the methods used? Laborious, difficult, appropriate for the purpose? Were the methods further developed during the thesis? Was the material suitable for the topic? Is there enough data collected, all the necessary repeats done? Here it should be noted that evaluation should be based on the student ?s ability to develop and use the provided methods and materials, not to evaluate the supervisor ?s ability to choose the methods. It is also good to keep in mind, that student can not always affect the amount of data collected, e.g. some experiments can be very expensive and all the required repeats cannot be performed.3. The clarity of the results including the tables, figures and statistical presentations.4. The coherence of the discussion. How the conclusions are drawn from the obtained data and linked to the previous research? How the possible sources of error are evaluated and discussed?5. How well the abstract describes the central methods, results and conclusions?6. Language and presentation style.7. How well the research problem is generally presented, including the errors and flaws which the student has or has not noticed.
Critical reflection is important in relation to published data.For you info also: the aim of the research is to study the effect of anatomically realistic throats and flow profiles on aerodynamic particle size distribution profile of Dry powder inhalers. Particle size will be measured using NGI analysis and HPLC-UV will be used to quantify the amount of drug substance in the samples. My proposal for Introduction paragraphs:
1.1 Pulmonary drug delivery
1.2 Dry powder inhalers and devices
1.3 Analysis of Dry powder inhalers
1.3.1 analysis of FPD by Ph. Eur
1.3.2analysis of FDP with more biorelevancy method
1.4 aims , hypothesis
Hypothesis is to study how aerodynamic particle size distribution profiles are affected when anatomical throats will use , and the size of the throat affects the results. The implementation of realistic flow profiles in NGI analytics anticipates affecting the works as well. In this study the impact of such changes in DPIs aerodynamic particle size distributibpton will study.
1.5 summary
Approximate price: $22
We value our customers and so we ensure that what we do is 100% original..

With us you are guaranteed of quality work done by our qualified experts.Your information and everything that you do with us is kept completely confidential.You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.The Product ordered is guaranteed to be original. Orders are checked by the most advanced anti-plagiarism software in the market to assure that the Product is 100% original. The Company has a zero tolerance policy for plagiarism.The Free Revision policy is a courtesy service that the Company provides to help ensure Customer’s total satisfaction with the completed Order. To receive free revision the Company requires that the Customer provide the request within fourteen (14) days from the first completion date and within a period of thirty (30) days for dissertations.The Company is committed to protect the privacy of the Customer and it will never resell or share any of Customer’s personal information, including credit card data, with any third party. All the online transactions are processed through the secure and reliable online payment systems.By placing an order with us, you agree to the service we provide. We will endear to do all that it takes to deliver a comprehensive paper as per your requirements. We also count on your cooperation to ensure that we deliver on this mandate.