Accounting Test 2

Exam Chapters 3,4,7 Student:
Which of the following is the correct formula to compute the predetermined overhead rate? Estimated total units in the allocation base divided by estimated total manufacturing overhead costs. Estimated total manufacturing overhead costs divided by estimated total units in the allocation base. Actual total manufacturing overhead costs divided by estimated total units in the allocation base. Estimated total manufacturing overhead costs divided by actual total units in the allocation base.
Which of the following would probably be the least appropriate allocation base for allocating overhead in a highly automated manufacturer of specialty valves?Machine-hours
Power consumption
Direct labor-hours
Machine setupsWhich terms will make the following statement true? When manufacturing overhead is overapplied, the Manufacturing Overhead account has a __________ balance and applied manufacturing overhead is greater than __________ manufacturing overhead.debit, actual
credit, actual
debit, estimated
credit, estimatedDaguio Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the total estimated manufacturing overhead was $224,580. At the end of the year, actual direct labor-hours for the year were 18,200 hours, manufacturing overhead for the year was underapplied by $12,100, and the actual manufacturing overhead was $219,580. The predetermined overhead rate for the year must have been closest to:$11. 40 per machine-hour
$12. 34 per machine-hour
$12. 06 per machine-hour
$10. 53 per machine-hourCrinks Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the estimated direct labor-hours were 11,200 hours and the total estimated manufacturing overhead was $259,840. At the end of the year, actual direct labor-hours for the year were 10,800 hours and the actual manufacturing overhead for the year was $254,840. Overhead at the end of the year was:$4,280 overapplied
$9,280 overapplied
$9,280 underapplied
$4,280 underappliedWashtenaw Corporation uses a job-order costing system. The following data are for last year: Washtenaw applies overhead using a predetermined rate based on direct labor-hours. What predetermined overhead rate was used last year?$3. 55 per direct labor-hour
$3. 25 per direct labor-hour
$3. 08 per direct labor-hour
$3. 36 per direct labor-hourA company should use process costing, rather than job order costing, if:production is only partially completed during the accounting period.
the product is manufactured in batches only as orders are received.
the product is composed of mass-produced homogeneous units.
the product goes through several steps of production.Which of the following characteristics applies to process costing, but does not apply to job order costing?The need for averaging.
The use of equivalent units of production.
Separate, identifiable jobs.
The use of predetermined overhead rates.The cost of beginning inventory under the weighted-average method is:added in with current period costs in determining costs per equivalent unit for a given period.
gnored in determining the costs per equivalent unit for a given period.
considered separately from costs incurred during the current period.
subtracted from current period costs in determining costs per equivalent unit for a given period.The Nichols Company uses the weighted-average method in its process costing system. The company recorded 29,500 equivalent units for conversion costs for November in a particular department. There were 6,000 units in the ending work in process inventory on November 30, 75% complete with respect to conversion costs.
The November 1 work in process inventory consisted of 8,000 units, 50% complete with respect to conversion costs. A total of 25,000 units were completed and transferred out of the department during the month. The number of units started during November in the department was:24,500 units
23,000 units
27,000 units
21,000 unitsDiston Company uses the weighted-average method in its process costing system. The first processing department, the Welding Department, started the month with 18,000 units in its beginning work in process inventory that were 30% complete with respect to conversion costs.
The conversion cost in this beginning work in process inventory was $44,820. An additional 90,000 units were started into production during the month. There were 21,000 units in the ending work in process inventory of the Welding Department that were 10% complete with respect to conversion costs. A total of $677,970 in conversion costs were incurred in the department during the month. What would be the cost per equivalent unit for conversion costs for the month? (Round off to three decimal places. )$8. 112
$8. 300
 $7. 533
 $6. 108Sanchez Corporation uses the weighted-average method in its process costing system. The Fitting Department is the second department in its production process. The data below summarize the department’s operations in March. The Fitting Department’s cost per equivalent unit for conversion cost for March was $8. 66. How much conversion cost was assigned to the units transferred out of the Fitting Department during March?$480,630
 $450,320
$444,258
$510,940Designing a new product is an example of (an):Unit-level activity.
Batch-level activity.
Product-level activity.
Organization-sustaining activity.McCaskey Corporation uses an activity-based costing system with the following three activity cost pools: The Other activity cost pool is used to accumulate costs of idle capacity and organization-sustaining costs. The company has provided the following data concerning its costs: The distribution of resource consumption across activity cost pools is given below: The activity rate for the Fabrication activity cost pool is closest to:$1. 65 per machine-hour
$4. 00 per machine-hour
$0. 0 per machine-hour
$2. 40 per machine-hourChristiansen Corporation uses an activity-based costing system with the following three activity cost pools: The Other activity cost pool is used to accumulate costs of idle capacity and organization-sustaining costs. The company has provided the following data concerning its costs: The distribution of resource consumption across activity cost pools is given below: The activity rate for the Order Processing activity cost pool is closest to:$676 per order
$780 per order
$560 per order
$312 per orderBossie Corporation uses an activity-based costing system with three activity cost pools. The company has provided the following data concerning its costs and its activity based costing system: How much cost, in total, would be allocated in the first-stage allocation to the Assembly activity cost pool?$196,333
$209,000
$310,000
$155,000Spendlove Corporation has provided the following data from its activity-based costing system: The company makes 430 units of product S78N a year, requiring a total of 1,120 machine-hours, 40 orders, and 30 inspection-hours per year.
The product’s direct materials cost is $49. 81 per unit and its direct labor cost is $12. 34 per unit. The product sells for $129. 90 per unit. According to the activity-based costing system, the product margin for product S78N is:$4,116. 50
$29,132. 50
$6,180. 50
$5,161. 30Wecker Corporation uses the following activity rates from its activity-based costing to assign overhead costs to products: Data concerning two products appear below: How much overhead cost would be assigned to Product V09X using the activity-based costing system?157. 87
$91,722. 47
$10,385. 22
$5,485. 50The balance in the Work in Process account equals:the balance in the Finished Goods inventory account.
the balance in the Cost of Goods Sold account.
the balances on the job cost sheets of uncompleted jobs.
the balance in the Manufacturing Overhead account.Overapplied manufacturing overhead occurs when:applied overhead exceeds actual overhead.
applied overhead exceeds estimated overhead.
actual overhead exceeds estimated overhead.
budgeted overhead exceeds actual overhead.
Approximate price: $22
We value our customers and so we ensure that what we do is 100% original..

With us you are guaranteed of quality work done by our qualified experts.Your information and everything that you do with us is kept completely confidential.You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.The Product ordered is guaranteed to be original. Orders are checked by the most advanced anti-plagiarism software in the market to assure that the Product is 100% original. The Company has a zero tolerance policy for plagiarism.The Free Revision policy is a courtesy service that the Company provides to help ensure Customer’s total satisfaction with the completed Order. To receive free revision the Company requires that the Customer provide the request within fourteen (14) days from the first completion date and within a period of thirty (30) days for dissertations.The Company is committed to protect the privacy of the Customer and it will never resell or share any of Customer’s personal information, including credit card data, with any third party. All the online transactions are processed through the secure and reliable online payment systems.By placing an order with us, you agree to the service we provide. We will endear to do all that it takes to deliver a comprehensive paper as per your requirements. We also count on your cooperation to ensure that we deliver on this mandate.